发新话题
打印

foamcore 材料——自製 iPod 車座

foamcore 材料——自製 iPod 車座

范:foamcore材料,不知道中文怎么翻译,似乎国外设计专业和设计公司用它来作模型的比较多,可能是发泡塑料一类的吧,待考。从下面的例子来看,似乎性能还不错,加工相对容易。
——————————
这是什麼?


原來是這樣子用的,iPod Holder。這個東西不難做,是用一種叫做 Foamcore (這東西我不知道中文怎麼翻?有點像珍珠板但又不完全一樣)的東西為主要材料,再用銀灰色的卡點西德割個 Apple 標誌貼上即可,前前後後大約花了三個鐘頭吧(製作過程照片?別開玩笑了)!


這東西躺在院子休息喝啤酒時最方便了~


進入正題,話說之前一直想將 iPod 弄到車上聽,但是一來找不到適合的轉接設備,二來除了去旅行外,我待在車上的時間並不長,也不想大費周章改車上的音響設備,所以就打算用無線調頻(FM Transmission)的方式將 iPod 的音樂播放出來。相信大家都知道,這類的調頻信號發射器效果都不太好,我先後用過朋友的 iTrip 和 iRiver,自己也買了一個 Mercury,但總是會有雜音,尤其是當開機音樂尚未播放出來時最明顯。原本想說放棄了,就將就著聽吧,直到去年八月底收到了
敗家網所販售的 Global Link GF-88,整個徹底改觀。當我調好了頻道,接上 iPod,將 GF-88 開到 on,頓時音響完全靜音,我知道不一樣了。而音樂播放出來時,效果比之前所用過的機型都要好太多了!

*本圖取自敗家網

再來是裝到車上了。因為我不抽煙......或者說戒了十多年了吧,所以車上煙灰缸沒用(當然我也不准有人在我車上抽煙),於是我裝上了這個東西(同樣是用 Foamcore 做的):

這是什麼?

是這樣用的!

看起來有些歷史了,是的,這玩意兒已經用了兩年半了,期間還陪過我征戰加拿大東岸,來回超過八千公里,所以證實 Foamcore 這材料雖輕,但還挺堅固的。至於 GF-88 放哪?我通常都是直接放在飲料座內,應該也幫它設計個座子才對~

當然或許有些網友會認為我言過其實,那可能是因為我住的環境並沒有地下電台,所以不會有干擾的情況發生。在台灣的網友如果對於音質真的很苛求,那麼可能以有線的方式連接才是長遠之計。
乐乎设计,乐乎生活~

TOP

http://en.wikipedia.org/wiki/Foamcore
wiki的一个解释:

Foamcore is a strong lightweight, easily cut material useful for backing, mounting photographic prints, framing, 3D design and painting. It consists of three layers — an inner layer of polystyrene clad with outer facing of either a white claycoated paper or brown Kraft paper.

The original white foamcore board was made in 1/8 inch (3 mm) and 3/16 inch (5 mm) thicknesses for the graphic arts industry by Monsanto under the trade name Fome-Cor. The surface of the regular board is slightly acidic. For archival photo purposes Monsanto produces a neutral, acid-free version. Similar products are now available from competitors in a wide range of sizes and thicknesses.

This material does not hold up well to some glues, such as superglue, and certain types of paint. The foam tends to melt away and dissolve. While Elmer's White glue works well in casual settings, the water in the glue can warp the fibers in the outer layers. Best results are typically obtained from the higher-end spray adhesives like 3M's Super 77. In situations where a craft store is either not nearby or closed, a hot glue gun can be used as a substitute, although the low viscosity of hot glues can show up in finished projects with board warp, bubbles, or other unsightly blemishes.

Foamcore is commonly used to produce scenery for games such as Warhammer, Warhammer 40,000 and Void[citation needed]. It's also often used by photographers as a reflector.

Foamcore also refers to a subgenre of House music that originated in foam dance parties and is differentiated by its conspicuously slow and heavy drum track in relation to the rest of the music.
乐乎设计,乐乎生活~

TOP

好像叫泡沫夹心板~~
Foam Core分成两种。
一种是模型板—其特征为中央的发泡材(Foam)是软质。去除一侧面纸,就可很容易地做出简单曲面,再用纸胶带贴回除去面纸的那一侧以固定弯曲。

另一种是展示板—其特征为中央的发泡材(Foam)是硬质。由于展示板平整,受潮也不易变型,用来裱照片发表作品非常优秀。

TOP

发新话题